Table of Contents
Advertisement
Configuring Multiple VRF
Selecting a VRF Instance
Moving between VRF instances is done by selecting an existing instance to become the active VRF CLI
context. The
vrf
command is also used to select an existing instance. For example, the following
command selects the IpTwo instance:
IpOne: -> vrf IpTwo
IpTwo: ->
In the above example, selecting the IpTwo instance changed the VRF CLI context from IpOne to IpTwo.
Any subsequent commands entered apply to the IpTwo instance.
Note. If the instance name specified with the vrf command does not exist, a VRF instance is automati-
cally created. In addition, configuring a VRF instance name is case sensitive. As a result, it is possible to
accidentally create or delete instances. Use the
tion before selecting, adding, or removing instances.
To return to the default VRF instance from within the context of another instance, enter the vrf command
with or without the optional default parameter. For example, both of the following commands return the
CLI context to the default VRF instance:
IpOne: -> vrf
IpOne: -> vrf default
Note that the command prompt for the default VRF instance does not display the instance name.
OmniSwitch AOS Release 7 Network Configuration Guide
show vrf
command to verify the VRF instance configura-
March 2011
Configuring VRF Instances
page 12-13
Advertisement
Table of Contents
