Diagnosing Switch Problems
Displaying Health Threshold Limits
The
show health configuration
well as individual thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage and CPU
usage.
To view all health thresholds, enter the following command:
-> show health configuration
Rx Threshold
TxRx Threshold
Memory Threshold
CPU Threshold
Sampling Interval (Secs) = 10
Note. For detailed definitions of each of the threshold types, refer to
on page
26-43, as well as
Guide.
OmniSwitch AOS Release 7 Network Configuration Guide
command is used to view all current health thresholds on the switch, as
= 80,
= 80,
= 80,
= 80,
Chapter 36, "Health Monitoring Commands,"
"Configuring Resource Thresholds"
in the OmniSwitch CLI Reference
March 2011
Monitoring Switch Health
page 26-43