Verifying 802.1Ab Configuration - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Verifying 802.1AB Configuration

Verifying 802.1AB Configuration
To display information about the ports configured to handle 802.1AB, use the following show command:
show lldp system-statistics
show lldp statistics
show lldp local -system
show lldp local -port
show lldp local-management-address
show lldp network-policy
show lldp med network-policy
show lldp remote-system
show lldp remote-system med
For more information about the resulting display, see
OmniSwitch CLI Reference Guide.
page 10-14
Displays system-wide statistics.
Displays port statistics.
Displays local system information.
Displays port information.
Displays the local management address information.
Displays the MED Network Policy details for a given
policy ID.
Displays the network policy configured on a slot or port. If
no option is specified, network policies configured on all
ports of the chassis are displayed.
Displays local port information of remote system.
Displays MED local port information of remote system.
Chapter 9, "802.1AB Commands,"
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring 802.1AB
in the
March 2011