Relationship To Other Features; Configuring Dynamic Link Aggregate Groups - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Configuring Dynamic Link Aggregate Groups

Relationship to Other Features

Link aggregation groups are supported by other switch software features. For example, you can configure
802.1Q tagging on link aggregation groups in addition to configuring it on individual ports. The following
features have CLI commands or command parameters that support link aggregation:
•
VLANs. For more information on VLANs, see
•
802.1Q. For more information on configuring and monitoring 802.1Q, see
VLANs."
•
Spanning Tree. For more information on Spanning Tree, see
Parameters."
Note. See "Application Examples" on page 7-27
Configuring Dynamic Link Aggregate Groups
This section describes how to use Alcatel-Lucent's Command Line Interface (CLI) commands to create,
modify, and delete dynamic aggregate groups. See
Parameters" on page 7-9
Note. See "Quick Steps for Configuring Dynamic Link Aggregation" on page 7-4
configuring these mandatory parameters.
Alcatel-Lucent's link aggregation software is preconfigured with the default values for dynamic aggregate
groups and ports shown in the table in
configurations, using only the steps described in
page 7-9 is necessary to configure a dynamic link aggregate group. However, if you need to modify any of
the parameters listed in the table on
Parameters" on page 7-12
Note. See the "Link Aggregation Commands" chapter in the OmniSwitch CLI Reference Guide for
complete documentation of show commands for link aggregation.
page 7-8
for tutorials on using link aggregation with other features.
for more information.
"Dynamic Link Aggregation Default Values" on page
"Creating and Deleting a Dynamic Aggregate Group" on
page 7-3, please see
for more information.
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring Dynamic Link Aggregation
Chapter 4, "Configuring VLANs."
Chapter 5, "Configuring Spanning Tree
"Configuring Mandatory Dynamic Link Aggregate
"Modifying Dynamic Link Aggregate Group
Chapter 4, "Configuring
for a brief tutorial on
7-3. For most
March 2011