Table of Contents
Advertisement
Verifying the VLAN Configuration
The above example output provides the following information:
•
VLAN 200 is the configured default VLAN for port 3/24, which is currently not active.
•
VLAN 200 is an 802.1Q-tagged VLAN for port 5/12, which is an active port but currently blocked
from forwarding traffic.
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
page 4-14
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring VLANs
March 2011
Advertisement
Table of Contents
