Power Over Ethernet Specifications - Alcatel-Lucent OmniSwitch 6450 User Manual

Managing Power over Ethernet (PoE)

Power over Ethernet Specifications

The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
"OmniSwitch 6450 Chassis and Hardware Components."
IEEE Standards supported
Default PoE administrative status
Default PoE operational status
Platforms supporting PoE
Cable distances supported
PoE-capable ports per switch
Default amount of inline power available
Range of inline power allowed
PoE Power Available
OmniSwitch 6450 Hardware Users Guide
IEEE 802.3at
Enabled
Disabled (PoE must be activated on a switch-
by-switch basis via the
mand.)
OmniSwitch 6450-P10, OmniSwitch 6450-P24,
OmniSwitch 6450-P48
100 meters (approx.)
10 (OmniSwitch 6450-P10)
24 (OmniSwitch 6450-P24)
48 (OmniSwitch 6450-P48)
31000 milliwatts
3000 - 31000 milliwatts
OmniSwitch 6450-P10 - ~ 90W
OmniSwitch 6450-P24 - ~ 390W
OmniSwitch 6450-P48 - ~ 740W
July 2012
Power over Ethernet Specifications
Chapter 2,
lanpower start com-
page 5-3