Server Defaults
The defaults for authentication server configuration on the switch are listed in the tables in the next
sections.
RADIUS Authentication Servers
Defaults for the
aaa radius-server
Description
Number of retries on the server before the
switch tries a backup server
Timeout for server replies to authentication
requests
UDP destination port for authentication
UDP destination port for accounting
* The port defaults are based on the older RADIUS standards; some servers are set up with port numbers
based on the newer standards (ports 1812 and 1813, respectively).
TACACS+ Authentication Servers
Defaults for the
aaa tacacs+-server
Description
Timeout for server replies to authentication
requests
The port number for the server
LDAP Authentication Servers
Defaults for the
aaa ldap-server
Description
The port number for the server
Number of retries on the server before the
switch tries a backup server
Timeout for server replies to authentication
requests
Whether a Secure Socket Layer is configured
for the server
OmniSwitch AOS Release 7 Network Configuration Guide
command are as follows:
Keyword
retransmit
timeout
auth-port
acct-port
command are as follows:
Keyword
timeout
port
command are as follows:
Keyword
port
retransmit
timeout
ssl | no ssl
March 2011
Default
3
2
1645*
1646*
Default
2
49
Default
389 (SSL disabled)
636 (SSL enabled)
3
2
no ssl
page 233