Power Over Ethernet Specifications - Alcatel-Lucent OmniSwitch 6250-M Hardware User's Manual

Installing and Managing Power over Ethernet (PoE)

Power over Ethernet Specifications

The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
"OmniSwitch 6250 Series Chassis and Hardware Components."
IEEE Standards supported
Default PoE administrative status
Default PoE operational status
Platforms supporting PoE
Cable distances supported
Total number of PoE-capable ports per switch
Default amount of inline power allocated for each port
Range of inline power allowed for each port
PoE Current draw
PoE Power Supply
OmniSwitch 6250 Series Hardware Users Guide
Preliminary
9/28/09
IEEE 802.3af; 802.3at
Enabled
Disabled (PoE must be activated on a switch-
by-switch basis via the
mand.)
OmniSwitch 6250-P24
100 meters (approx.)
4
15400 milliwatts
3000–20000 milliwatts
Approximately 4.3 Amps
225 Watts
September 2009
Power over Ethernet Specifications
Chapter 2,
lanpower start com-
page 5-3