Table of Contents
Advertisement
802.1AB Overview
Optional TLVs
The optional TLVs defined as part of LLDP are grouped into the following sets listed below:
Basic Management TLV Set
•
Port Description TLV
•
System Name TLV
•
System Description TLV
•
System capabilities TLV
•
Management address TLV
Note. This optional TLV set is required for all LLDP implementation.
IEEE 802.1 Organizationally Specific TLV Set
•
Port VLAN ID TLV
•
Port and Protocol VLAN ID TLV
•
VLAN name TLV
•
Protocol identity TLV
Note. If one TLV from this set is included in the LLDPDU, then all the other TLVs need to be included.
IEEE 802.3 Organizationally Specific TLV Set
•
MAC/PHY configuration/status TLV
•
Power through MDI TLV (in network connectivity TLV set, Extended Power-through-MDI TLV is
supported)
•
Link Aggregation TLV
•
Maximum frame size TLV
ANSI-TIA LLDP-MED TLV Sets
•
Network connectivity TLV set
•
LLDP-MED capabilities TLV
•
Network Policy TLV
•
Inventory Management TLV
•
Location Identification TLV
•
Extended Power-through-MDI TLV
page 10-6
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring 802.1AB
March 2011
Advertisement
Table of Contents
