Sample Display For History Probe; Sample Display For Alarm Probe - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Network configuration guide
Hide thumbs Also See for OmniSwitch AOS Release 7:
Table of Contents

Advertisement

Remote Monitoring (RMON)

Sample Display for History Probe

The display shown here identifies RMON Probe 10325's Owner description and interface location
(Analyzer-p:128.251.18.166 on slot 1, port 35), the total number of History Control Buckets (samples)
requested and granted (2), along with the time interval for each sample (30 seconds) and system-generated
Sample Index ID number (5859). The probe Entry number identifier (10325), probe Flavor (History), and
Status (Active), the amount of time that has elapsed since the last change in status (48 hours, 53 minutes),
and the amount of memory allocated to the probe, measured in bytes (601) are also displayed.
-> show rmon probes history 30562
Probe's Owner: Analyzer-p:128.251.18.166 on Slot 1, Port 35
History Control Buckets Requested
History Control Buckets Granted
History Control Interval
History Sample Index
Entry 10325

Sample Display for Alarm Probe

The display shown here identifies RMON Probe 11235's Owner description and interface location
(Analyzer-t:128.251.18.166 on slot 1, port 35), as well as the Alarm Rising Threshold of the probe and
Alarm Falling Threshold, maximum allowable values beyond which an alarm is generated and sent to the
Event group (5 and 0, respectively).
Additionally, the corresponding Alarm Rising Event Index number (26020) and Alarm Falling Event
Index number (0), which link the Rising Threshold Alarm and Falling Threshold Alarm to events in the
Event table, are identified. The Alarm Interval, a time period during which data is sampled (10 seconds)
and Alarm Sample Type (delta value—variable) are also shown, as is the Alarm Variable ID number
(1.3.6.1.2.1.16.1.1.1.5.4008). The probe Entry number identifier (11235), probe Flavor (Alarm), Status
(Active), the amount of time that has elapsed since the last change in status (48 hours, 48 minutes), and the
amount of memory allocated to the probe, measured in bytes (1677) are also displayed.
-> show rmon probes alarm 31927
Probe's Owner: Analyzer-t:128.251.18.166 on Slot 1, Port 35
Alarm Rising Threshold
Alarm Falling Threshold
Alarm Rising Event Index
Alarm Falling Event Index
Alarm Interval
Alarm Sample Type
Alarm Startup Alarm
Alarm Variable
Entry 11235
Flavor = Alarm, Status = Active
Time = 48 hrs 48 mins,
System Resources (bytes) = 1677
page 26-38
Flavor = History, Status = Active
Time = 48 hrs 53 mins,
System Resources (bytes) = 601
= 5
= 0
= 26020
= 0
= 10 seconds
= delta value
= rising alarm
= 1.3.6.1.2.1.16.1.1.1.5.4008
OmniSwitch AOS Release 7 Network Configuration Guide
Diagnosing Switch Problems
= 2
= 2
= 30 seconds
= 5859
March 2011

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniswitch aos 7

Table of Contents