Table of Contents
Advertisement
BFD Application Example
Step 4: Configure OSPF Interfaces
Next, OSPF interfaces must be created, enabled, and assigned to area 0.0.0.1. The OSPF interfaces should
have the same interface name as the IP router interfaces created above in
page
16-24.
Router 1
-> ip ospf interface vlan-31
-> ip ospf interface vlan-31 area 0.0.0.0
-> ip ospf interface vlan-31 admin-state enable
-> ip ospf interface vlan-12
-> ip ospf interface vlan-12 area 0.0.0.0
-> ip ospf interface vlan-12 admin-state enable
-> ip ospf interface vlan-10
-> ip ospf interface vlan-10 area 0.0.0.1
-> ip ospf interface vlan-10 admin-state enable
Router 2
-> ip ospf interface vlan-12
-> ip ospf interface vlan-12 area 0.0.0.0
-> ip ospf interface vlan-12 admin-state enable
-> ip ospf interface vlan-23
-> ip ospf interface vlan-23 area 0.0.0.0
-> ip ospf interface vlan-23 admin-state enable
-> ip ospf interface vlan-20
-> ip ospf interface vlan-20 area 0.0.0.2
-> ip ospf interface vlan-20 admin-state enable
Router 3
-> ip ospf interface vlan-23
-> ip ospf interface vlan-23 area 0.0.0.0
-> ip ospf interface vlan-23 admin-state enable
-> ip ospf interface vlan-31
-> ip ospf interface vlan-31 area 0.0.0.0
-> ip ospf interface vlan-31 admin-state enable
-> ip ospf interface vlan-30
-> ip ospf interface vlan-30 area 0.0.0.3
-> ip ospf interface vlan-30 admin-state enable
Step 5: (Optional) Configure BFD Interfaces
Next, BFD interfaces must be created and enabled. The BFD interfaces should have the same interface
name as the IP router interfaces created above in
Router 1
-> ip bfd interface vlan-31
-> ip bfd interface vlan-31 admin-state enable
-> ip bfd interface vlan-12
-> ip bfd interface vlan-12 admin-state enable
page 16-26
"Step 1: Prepare the Routers" on page
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring BFD
"Step 1: Prepare the Routers" on
16-24.
March 2011
Advertisement
Table of Contents
