Power Over Ethernet Specifications - Alcatel-Lucent OmniSwitch 6400 Series Hardware User's Manual

Managing Power over Ethernet (PoE)

Power over Ethernet Specifications

The table below lists general specifications for Alcatel-Lucent's Power over Ethernet support. For more
detailed power supply and Power Source Equipment (PSE) specifications, refer to
"OmniSwitch 6400 Series Chassis and Hardware Components."
IEEE Standards supported
Default PoE administrative status
Default PoE operational status
OmniSwitch 6400 Series platforms supporting PoE
Cable distances supported
Total number of PoE-capable ports per switch
Default amount of inline power allocated for each slot
Range of inline power allowed for each slot
Default amount of inline power allocated for each port
Range of inline power allowed for each port
PoE Current draw
PoE Power
OmniSwitch 6400 Series Hardware Users Guide
IEEE 802.3af DTE Power via MDI
Enabled
Disabled (PoE must be activated on a switch-
by-switch basis via the
mand.)
OmniSwitch 6400-P24 and OmniSwitch 6400-
P48
100 meters (approx.)
24 or 48
390 Watts (510W power supply)
240 Watts (360W power supply)
37–390 (510W power supply)
37-240 (360W power supply)
15400 milliwatts
3000–16000 milliwatts (15400 milliwatts rec-
ommended maximum)
Approximately 4.3 Amps
390 Watts (510W power supply)
240 Watts (360W power supply)
August 2008
Power over Ethernet Specifications
Chapter 2,
lanpower start com-
page 5-3