Hp E1340A Afg Status; Introduction; Status System Registers - HP E1340A User Manual

Introduction

Status System Registers

203

HP E1340A AFG Status

HP E1340A AFG Status
This chapter describes the HP E1340A Arbitrary Function Generator status
system. Included is information on the status groups used by the AFG, the
conditions monitored by each group, and information on how to enable a
condition to interrupt the computer.
This main sections of this chapter include:
Status System Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 203
The Operation Status Group. . . . . . . . . . . . . . . . . . . . . . . . Page 205
The Standard Event Status Group . . . . . . . . . . . . . . . . . . . Page 207
The Status Byte Status Group . . . . . . . . . . . . . . . . . . . . . . Page 208
Using the Standard Event Status Group. . . . . . . . . . . . . . . Page 210
Operating conditions within the AFG are monitored by registers in various
status groups. The status groups implemented by the AFG are:
Operation Status Group
Condition Register
–
Transition Filter
–
Event Register
–
Enable Register
–
Standard Event Status Group
Standard Event Status Register
–
Standard Event Status Enable Register
–
Status Byte Status Group
Status Byte Register
–
Service Request Enable Register
–
The relationship between the registers and filters in these groups is shown in
Figure 8-1.
Chapter 8
Chapter 8