HP E1340A User Manual page 227

Table B-4. HP E1340A Error Messages (Cont'd)
Settings Conflict Error Messages
The following shows the conflicting settings and the change(s) made internally by the AFG.
SOUR:FREQ:FIX frequency < minimum; SOUR:FREQ:FIX MIN set
SOUR:FREQ:FIX frequency > maximum; SOUR:FREQ:FIX MAX set
ARB:DAC:SOUR VXI and CAL:STAT:AC ON; CAL:STAT:AC OFF set
ROSC:SOUR EXT and ROSC:FREQ:EXT not 42.94967296 MHz and CAL:STAT:AC ON; CAL:STAT:AC OFF set
multiple Aux In BNC uses; SOUR:ROSC:GATE:STAT OFF set
multiple Aux In BNC uses; ARM:LAY2:SOUR IMM set
multiple Aux In BNC uses; SOUR:FREQ:MODE FIX set
multiple Aux In BNC uses; SOUR:FUNC:USER A set
SOUR:FREQ:MODE FSK and ARM:LAY1:COUN not INF; ARM:LAY1:COUN INF set
SOUR:FREQ:FSK frequency < minimum; SOUR:FREQ:FSK MIN set
SOUR:FREQ:FSK frequency > maximum; SOUR:FREQ:FSK MAX set
ARM:LAY1:COUN INF and ARM:LAY2:SOUR EXT; ARM:LAY2:SOUR IMM set
FUNC:USER:AB and ARM:LAY1:COUN >32767; ARM:LAY1:COUN 32767 set
FUNC:USER:ABCD and ARM:LAY1:COUN > 16383; ARM:LAY1:COUN 16383 set
OUTP:LOAD INF and SOUR:VOLT unit W, DBM, or DBMW; SOUR:VOLT:AMPL MIN (in V) set
ARM:LAY2:COUN 1 and ARM:LAY2:SOUR EXT; ARM:LAY2:SOUR IMM set
ARM:LAY2:COUN >1 and ARM:LAY2:SOUR IMM; ARM:LAY2:SOUR EXT set
SOUR:FREQ:MODE SWE and ARM:LAY1:COUN not INF; ARM:LAY1:COUN INF set
SOUR:FREQ:MODE SWE and ARM:LAY2:SOUR not IMM; ARM:LAY2:SOUR IMM set
SOUR:FREQ:SPAN frequency < minimum; SOUR:FREQ:MODE FIX set
Appendix B HP E1340A Useful Tables 227