Span - HP E1340A User Manual

Parameters
Comments
Example

:SPAN

Parameters
Comments
Example
Chapter 7
Parameter Parameter
Name Type
mode discrete
The "Aux In" BNC is a multiple-use input: for FSK control, for
waveform hopping control, as a reference oscillator source, for
reference oscillator gating, or as a start arm source. Only one of
these uses may be active at any time.
Executable when initiated: Query form only
Coupled command: Yes
Related Commands:
SOURce:SWEep
*RST Condition:
Setting frequency sweep mode
FREQ:MODE SWEep
[SOURce:]FREQuency:SPAN <
frequency-swept waveform.
Parameter Parameter
Name Type
freq_span numeric
The legal range for freq_span
are context-dependent. See the section "Coupling Rules" at the beginning of
the SOURce:FREQuency subsystem for a description of the coupling between
STARt, STOP, CENTer, and SPAN.
Executable when initiated: Query form only
Coupled command: Yes
Related Commands:
STARt , and STOP
SOURce:ROSCillator
*RST Condition:
Setting the frequency span
FREQ:SPAN 1E3
[SOURce:]FREQuency:SPAN
Range of
Values
CW | FIXed | FSKey |
SWEep
SOURce:FREQuency
subsystem
SOURce:FREQuency:MODE FIXed
Set frequency sweep mode
freq_span sets the frequency span for a
>
Range of
Values
see below |
MINimum | MAXimum
, as well as the MINimum and MAXimum values,
SOURce:FREQuency:CENTer
, SOURce:FUNCtion:SHAPe
SOURce:FREQuency:SPAN 15.0 MHz
Set frequency span to 1000 Hz
HP E1340A Command Reference
Default
Units
none
subsystem,
Default
Units
Hz
, MODE ,
,
157