HP E1340A User Manual page 226

Arbitrary function generator
Hide thumbs Also See for E1340A:
Table of Contents

Advertisement

Code
-430
-440
1005
Calibration constant out of range
1006
1011
1012
1014
1015
Illegal when SOUR:ARB:DAC not
1018
1019
1100
1102
1108
1110
1113
1118
1119
No sequence name selected for
226 HP E1340A Useful Tables
Table B-4. HP E1340A Error Messages (Cont'd)
Message
Query DEADLOCKED
Query UNTERMINATED after
indefinite response
Calibration constant conflict
Illegal while download enabled
Illegal when not downloading
Illegal while initiated
INT
Illegal while calibrating
Illegal while not calibrating
Illegal segment name
Segment in use
No segment name SELected
Illegal sequence name
Sequence contains zero-length
segment
No sequence name SELected
output
Description
The HP E1340A's input and output buffers are full
and the AFG cannot continue.
Occurs when the *IDN? query is not the last query
executed in a command string.
Illegal calibration constant was computed.
Calibration constants used during calibration set an
illegal condition.
Commands such as SOUR:LIST cannot be executed
under current conditions. Execute
SOUR:ARB:DOWN:COMP to disable downloading.
SOUR:ARB:DOWN:COMP disables downloading
only after it has previously been enabled.
Command cannot be executed while the HP E1340A
is in the initiated (instrument action) state.
SOUR:LIST command cannot be executed unless the
DAC data source is internal.
Command cannot be sent to the HP E1340A while
the device is calibrating.
The command is only valid when the HP E1340A is
calibrating.
Attempting to download to a segment that doesn't
exist, or selecting a segment name that's the same as
an existing sequence name.
Trying to delete a segment that is within a sequence.
Trying to load a segment that has not been selected.
Attempting to download to a sequence that doesn't
exist, or selecting a sequence name that's the same
as an existing segment name.
Segment contains no voltage or DAC code data.
SOUR:LIST:SSEQ subsystem command executed
without a segment sequence first selected by
SOUR:LIST:SSEQ:SEL.
INITiate command sent while SOUR:FUNC:USER
NONE selected.
Appendix B

Advertisement

Table of Contents
loading

Table of Contents