Linking Commands
Command Choices
SCPI Command Reference
137 HP E1340A Command Reference
Linking IEEE 488.2 Common Commands.
Use a semicolon between the commands. For example:
*RST;*CLS;*OPC?
Linking Multiple SCPI Commands.
Use a semicolon (;) and a colon (:) to link commands within different
subsystems. For example:
SOUR:ROSC:SOUR INT;:ARM:STAR:LAY1:COUN 20
Commands within the same subsystem are linked with a semicolon (;). For
example:
ARM:STAR:LAY1:COUN 20;LAY2:COUN 5
Some commands are listed as two commands separated with a vertical bar
( | ). This means that either command name can be used. For example, use
either "
" or "
:CW
:FIXed
This section contains the SCPI commands for the HP E1340A Arbitrary
Function Generator. Commands are listed alphabetically by subsystem and
also within each subsystem. A command guide is printed in the top margin
of each page. The guide indicates the first command listed on that page.
" when "
" is shown.
:CW | FIXed
Chapter 7