HP E1340A User Manual page 224

Code
-101
-102
-103
-104
-108
-109
-112 Program mnemonic too long
-113
-121 Invalid character in number
-123
-124
-128 Numeric data not allowed
-131
-138
-141
-144
-148 Character data not allowed
-151
-158
224 HP E1340A Useful Tables
Table B-4. HP E1340A Error Messages
Message
Invalid character
Syntax error
Invalid separator
Data type error
Parameter not allowed
Missing parameter
Undefined header
Numeric overflow
Too many digits
Invalid suffix
Suffix not allowed
Invalid character data
Character data too long
Invalid string data
String data not allowed
Description
Unrecognized character in parameter.
Command is missing a space or comma between
parameters.
Parameter is separated by a character other than a
comma.
The wrong data type (number, character, string,
expression) was used when specifying the parameter.
Parameter specified in a command which does not
require one.
Command requires a parameter(s).
Command keyword > 12 characters.
Command header (keyword) was incorrectly specified.
A character other than a comma or number is in the
middle of a number.
A parameter value is greater than what can be
represented with the number format.
More than 256 digits were used to specify a number.
A number was specified when a letter was required.
Parameter suffix incorrectly specified (e.g. VO rather
than VP).
Parameter suffix is specified when one is not allowed.
Discrete parameter specified is not a valid choice.
A segment or sequence name is too long, or a
discrete parameter is > 12 characters. Segment and
sequence names must be 12 characters or less.
Discrete parameter was specified when another type
(e.g. numeric, boolean) is required.
The string data specified (e.g. for the
SOUR:MARK:FEED <source> command is not a
valid choice.
A string was specified when another parameter type
(i.e. discrete, numeric, boolean) is required.
Appendix B