Ieee-488.2 Common Commands; Common Command Reference - HP E1340A User Manual

IEEE-488.2 Common Commands

Category
System Data
Internal Operations
Synchronization
Macro
Status & Event
Stored Settings
188 HP E1340A Command Reference
This section describes the IEEE-488.2 Common Commands implemented in
the HP E1340A. The table below shows the commands listed by functional
group; however, commands are listed alphabetically in the reference.
Examples are shown in the reference when the command has parameters or
returns a non-trivial response; otherwise, the command string is as shown in
the table. For additional information, refer to IEEE Standard 488.2-1987.
Command
*IDN?
*LRN?
*RST
*TST?
*OPC
*OPC?
*WAI
*DMC < name >,< data >
*EMC < enable >
*EMC?
name
*GMC? < >
*LMC?
*PMC
name
*RMC < >
*CLS
*ESE < mask >
*ESE?
*ESR?
*SRE
*SRE?
*STB?
*RCL
*SAV
Title
Identification Query
Learn Device Setup Query
Reset Command
Self Test Query
Operation Complete Command
Operation Complete Query
Wait-to-Continue Command
Define Macro Command
Enable Macro Command
Enable Macro Query
Get Macro Contents Query
Learn Macro Query
Purge Macros Command
Remove Individual Macro Command
Clear Status Command
Standard Event Status Enable Command
Standard Event Status Enable Query
Standard Event Status Register Query
Service Request Enable Command
Service Request Enable Query
Read Status Byte Query
Recall Command
Save Command
Chapter 7