Table of Contents
Advertisement
Chapter 6
8. Generate, Download, and Store the First Waveform Segment as DAC
Codes -
This step stores the DAC codes of the Waveform Segment into
memory. The command or downloading method used depends on the
device that downloads the data. For example, the device may be an
embedded controller like the HP E1480A V360/Controller. (You can
also use the HP E1405A/E1406A Command Module or HP
E1300A/E1301A Mainframe, but at a slower data transfer rate.)
9. Notify the AFG that Downloading is Completed -
[SOURce:]ARBitrary:DOWNload:COMPlete
Send this command to the AFG after all data is downloaded.
10. Generate, Download, and Store the Second Waveform Segment as
DAC Codes -
This step stores the DAC codes of the Waveform Segment into
memory. The command or downloading method used depends on the
device that downloads the data. For example, the device may be an
embedded controller like the HP E1480A V360/Controller. (You can
also use the HP E1405A/E1406A Command Module or HP
E1300A/E1301A Mainframe, but at a slower data transfer rate.)
11. Notify the AFG that Downloading is Completed -
[SOURce:]ARBitrary:DOWNload:COMPlete
Send this command to the AFG after all data is downloaded.
12. Generate the Output -
[SOURce:]FUNCtion:USER <
INITiate[:IMMediate]
name
>
HP E1340A High Speed Operation
122
Advertisement
Table of Contents
