r
HP E1340A Sweeping and Frequency-Shift
Chapter Contents
The Command Reference
Programming Flowchart
83
HP E1340A Sweeping and Frequency-Shift Keying
This chapter covers the sweeping and frequency-shift keying (FSK) features
of the HP E1340A Arbitrary Function Generator (AFG). The chapter is
organized as follows:
Sweeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 85
Sweeping Using Start and Stop FrequenciesPage 85
Sweeping Using Start and Span FrequenciesPage 88
Sweep Points Vs. Sweep Time . . . . . . . . . . . . . . . . . . . . . Page 90
Frequency-Shift Keying. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 92
Program CommentsPage 94
Detailed information on the commands introduced in this chapter can be
found in Chapter 7 under " Command Reference" . The commands in this
chapter are shown in their entirety (optional headers included) to help you
locate them in the reference.
The flowchart on page 84 shows the commands and the command execution
order to generate standard waveforms. The reset (power-on) values of each
command are also noted on the flowchart. Note that the IEEE 488.2
command places the AFG into its power-on state. Thus, it may be
unnecessa
y to execute all of the commands on the flowchart.
Chapter 4
Keying
*RST
Chapter 4