In This Service Guide - Agilent Technologies 16800 Series Service Manual

In this Service Guide

6
This book is the service guide for the 16800 Series logic
analyzers and is divided into eight chapters.
Chapter 1, "General Information" contains information about
the instrument including accessories, specifications and
characteristics, and a list of the equipment required for
servicing the instrument.
Chapter 2, "Preparing for Use" tells how to prepare the
instrument for use.
Chapter 3, "Testing Performance" gives instructions on how
to test the performance of the instrument.
Chapter 4, "Calibrating and Adjusting" contains calibration
instructions for the instrument.
Chapter 5, "Troubleshooting" contains self- tests and
flowcharts for troubleshooting the instrument.
Chapter 6, "Replacing Assemblies" tells how to replace the
instrument and assemblies of the instrument, and how to
return them to Agilent Technologies.
Chapter 7, "Replaceable Parts" lists replaceable parts, shows
exploded views, and gives ordering information.
Chapter 8, "Theory of Operation" explains how the
instrument works and what the self- tests are checking.
Revision History
Table 2 Revision History
Revision
16800-97014, November
2011
(this version)
16800-97004, June 2007
16800-97003, August 2006
16800-97002, July 2006
16800-97001, July 2006
Reason
Changes in replaceable part numbers and the
recovery procedure for the 16800 logic analyzers
that are shipped with Windows 7 installation
(serial numbers MY50370000 or greater)
Module interface board (MIB), chassis, and cover
changes. These part changes appear in serial
numbers above: MY46000901/SG46000901
Changes to Testing Performance procedure.
Changes to Testing Performance procedure.
First edition.
16800 Series Portable Logic Analyzers Service Guide