To Assemble The Sma/Flying Lead Test Connectors - Agilent Technologies 16800 Series Service Manual

3
Testing Performance

To Assemble the SMA/Flying Lead Test Connectors

Table 8 Materials Required for SMA/Flying Lead Test Connectors
Material
SMA Board Mount Connector
(Qty 6)
Pin Strip Header
(Qty 1, which will be separated)
SMA 50 ohm terminators
(Qty 1)
SMA m-m adapter
(Qty 3)
28
The SMA/Flying Lead test connectors provide a
high- bandwidth connection between the logic analyzer and
the test equipment. The following procedure explains how to
fabricate the required test connectors.
Critical Specification
.100" X .100" Pin Strip Header, right
angle, pin length .230", two rows, .120"
solder tails, 2 X 40 contacts
Minimum bandwidth 2 GHz
Recommended Model/Part
Johnson 142-0701-801
(see www.johnsoncomponents.com)
3M 2380-5121TN or similar 2- row with
0.1" pin spacing
Johnson 142-0801-866 50 ohm Dummy
Load Plug
Johnson 142-0901-811 SMA Plug to
Plug or similar
16800 Series Portable Logic Analyzers Service Guide