5
Troubleshooting
To verify pattern generator output
114
Table 15 Equipment Required to Verify Pattern Output
Equipment
Oscilloscope
Probe
Output Data Pod
1
Connect one of the 10460- series data pods to the end of
the pattern generator Pod 1 cable.
From the Agilent Logic Analyzer application's main
2
menu, select Setup→My Pattern Generator-1→Bus/Signals....
In the Pattern Generator Setup dialog's Buses/Signals tab,
3
assign channels to Pod 1.
Critical Specification
Recommended
Model/Part
> 500 MHz Bandwidth
54820A
500 MHz Bandwidth
1160A
no substitute
10460A-series
16800 Series Portable Logic Analyzers Service Guide