To remove and replace the touch screen controller board
16800 Series Portable Logic Analyzers Service Guide
1
Perform previous procedures:
•
"To prepare the instrument for disassembly"
page 120.
•
"To remove and replace the cover"
•
"To remove and replace the front panel assembly"
page 129.
2
Disconnect the touch screen cable from the touch screen
controller board.
Using a Torx T10 screwdriver, remove the 2 screws
3
securing the board to the front panel board.
4
Reverse this procedure to install the touch screen
controller board.
T-10
screws
(2)
Replacing Assemblies
on page 122.
Touch screen
cable
6
on
on
Touch
screen
controller
board
131