Testing Performance - Agilent Technologies 16800 Series Service Manual

Agilent 16800 Series Portable Logic Analyzers
Service Guide
3

Testing Performance

To perform the power-up tests
Logic Analyzer Test Strategy
To Assemble the SMA/Flying Lead Test Connectors
To Test the Minimum Master to Master Clock Time and Minimum Eye
Width 33
Equipment Required 34
Prepare the Logic Analyzer for Testing
Set Up the Test Equipment
Connect the Test Equipment
Configure the Logic Analyzer
Test Pod 1 in 250 Mb/s Mode
Test Pod 2 in 250 Mb/s Mode
Test Pods 3 and 4 in 250 Mb/s Mode
Test the Remaining Pods in 250 Mb/s Mode
Test Pod 1 in 500 Mb/s Mode
Test Pod 2 in 500 Mb/s Mode
Test the Remaining Pods in 500 Mb/s Mode
Conclude the State Mode Tests
Performance Test Record
To ensure the 16800 Series logic analyzer is operating
correctly, you can perform:
• Power- up tests.
• Self- tests that are started from within the Agilent Logic
Analyzer application. See
page 88.
• Manual performance verification tests to verify that the
logic acquisition cards are meeting their specifications.
There are no specifications associated with the 16800
Series logic analyzer system mainframe or the pattern
generator card, so there are no manual performance
verification tests for them.
Agilent Technologies
26
27
35
37
39
45
52
57
58
59
60
64
65
66
68
"To run the self- tests"
28
on
25