To Remove And Replace The Display Assembly - Agilent Technologies 16800 Series Service Manual

6
Replacing Assemblies

To remove and replace the display assembly

Alignment
pins
Front panel
assembly
bracket
134
Your logic analyzer may have either a contrast filter or a
touch screen depending on the option you ordered.
Perform previous procedures:
1
• "To prepare the instrument for disassembly"
page 120.
• "To remove and replace the cover"
• "To remove and replace the front panel assembly"
page 129.
• "To remove and replace the backlight inverter
board" on page 130.
• "To remove and replace the front panel bracket
assembly"
Using a Torx T10 screwdriver, remove the 2 screws
2
securing the display assembly to the front panel bracket
assembly.
Remove the alignment pins on the bracket from the holes
3
on LCD.
Alignment
holes
on page 132.
Liquid crystal
display (LCD)
T-10 screws (2)
16800 Series Portable Logic Analyzers Service Guide
on
on page 122.
on
Contrast filter
(option 102)
Touch screen
(option 103)
Touch screen
control board
assembly