Perform System Self-Tests - Agilent Technologies 16800 Series Service Manual

3
Testing Performance

Perform System Self-Tests

36
Perform a self- test on the logic analyzer:
When the logic analyzer has finished booting, the
1
Waveform window appears. Select Help→Self-Test... from
the main menu. The Analysis System Self Tests dialog
appears.
2 In the Select Suite(s) list, select <all>. This will cause
<all> to be selected in the Select Test(s) list.
Select Start. This will perform a complete system self- test.
3
The progress of the self tests is displayed in the Progress
& Statistics area of the dialog.
When the self- tests are complete, check the Results area
4
to ensure that the Result Summary says that all tests
passed. If all tests did not pass, refer to
"Troubleshooting," starting on page 71.
Select the Close button to close the Analysis System Self
5
Tests dialog.
6 If all module self- tests pass, then record "PASS" in the
"Logic Analyzer Self- Tests" section of the Performance
Test Record (page 68).
16800 Series Portable Logic Analyzers Service Guide
Chapter 5,