To Remove And Replace The Fans; 60 Mm Fan - Agilent Technologies 16800 Series Service Manual

To remove and replace the fans

60 mm fan

Motherboard
Fan cable
16800 Series Portable Logic Analyzers Service Guide
Perform previous procedures:
1
• "To prepare the instrument for disassembly"
page 120.
• "To remove and replace the cover"
Disconnect the fan cable from the module interface board
2
(MIB).
3 Using a Torx T25 screwdriver, remove the 2 screws
holding the fan to the rear of the chassis.
Reverse this procedure to replace the fan.
4
Replacing Assemblies
on
on page 122.
T-25
screws (2)
Fan
147
6