Test The Complement Of The Bits (Pod 2, 250 Mb/S Mode); Test Pods 3 And 4 In 250 Mb/S Mode - Agilent Technologies 16800 Series Service Manual

3
Testing Performance

Test the complement of the bits (Pod 2, 250 Mb/s mode)

Test Pods 3 and 4 in 250 Mb/s Mode

58
Adjust the sampling positions using eye finder. Be sure to
13
expand "My Bus 1" and use the recommended starting
position noted on
necessary. See page
14 Determine pass or fail (1 of 2 tests). See
Click OK to close the "Analyzer Setup" dialog.
15
Switch to the Listing window by selecting the Listing tab
16
at the bottom of the main logic analyzer window.
Click the Run Repetitive icon
17
Determine pass or fail (2 of 2 tests). See
18
Test the complement of the bits. See
1
1 Perform the normal and complement tests for Pod 3 and
Pod 4 on the logic analyzer, changing the connection to
the pod, channel assignments, thresholds, etc. as
appropriate.
Test using clock Clk3 for Pod 3 and clock Clk4 for Pod 4.
page 49. Realign any stray channels if
50.
.
page
16800 Series Portable Logic Analyzers Service Guide
page 52.
page 54.
55.