To Remove And Replace The Front Panel Bracket Assembly - Agilent Technologies 16800 Series Service Manual

6
Replacing Assemblies

To remove and replace the front panel bracket assembly

132
1 Perform previous procedures:
• "To prepare the instrument for disassembly"
page 120.
• "To remove and replace the cover"
• "To remove and replace the front panel assembly"
page 129.
2 Using a Torx T10 screwdriver, remove the 2 screws
securing the touch screen controller board to the front
panel bracket assembly.
3 Using a Torx T10 screwdriver, remove the 6 screws
securing the front panel bracket assembly to the front
panel.
4 Remove the bracket assembly.
T-10
screws (8)
Reverse this procedure to replace the front panel bracket
5
assembly.
Front panel
bracket assembly
Touch screen
controller board
16800 Series Portable Logic Analyzers Service Guide
on
on page 122.
on
Front
panel