To replace the hard disk drive
If you have a 16800 series Logic Analyzer with Windows XP installation
If you have a 16800 series Logic Analyzer with Windows 7 installation
16800 Series Portable Logic Analyzers Service Guide
In case of a hard disk failure, you send your Logic Analyzer
unit to Agilent for repair/replacement of the failed/defective
hard disk. See
"Returning Assemblies"
more about how to return the unit to Agilent for repair.
For 16800 series logic analyzers with Windows XP
installation, the replaced hard disk (part number 0950- 5301)
does not have the operating system or the Logic Analyzer
software pre- installed. Therefore, once you get back your
logic analyzer with the replaced hard disk, you need to:
• first restore your system software, see
system software"
• then install the Logic Analyzer software from
www.agilent.com/find/la- sw-
For 16800 series logic analyzers with Windows 7 installation,
the replaced hard disk (part number 16800- 68712) will come
preformatted and preimaged with Windows 7 operating
system and Logic Analyzer software. Therefore, once you get
back your logic analyzer with the replaced hard disk, you
need not perform any steps to restore your system software.
You can download and install the latest Logic Analyzer
software from
www.agilent.com/find/la- sw-
Replacing Assemblies
on page 151 to know
on page 97.
download.
6
"To restore the
download.
145