Table of Contents
Advertisement
Installation
Remove the Shipping Hardware
Shipping Hardware. All shipping hardware must be removed before
-CAUTION-
operating the instrument and reinstalled before repackaging the
instrument for shipment.
See Figure 1. Remove the shipping screw, o-ring, and rubber plug.
1.
See Figure 2. Install the plug in the hole where the shipping screw was originally
2.
located, and insert the screw and o-ring in the hole where the plug was originally
located. The plug prevents light from entering the reading chamber during
operation.
Shipping screw
and o-ring
Plug
Agilent BioTek Epoch Instructions for Use
7201009I Revision C
Figure 1
Figure 2
Page 13 of 31
Plug
Shipping screw
and o-ring
Agilent Technologies, Inc.
Advertisement
Table of Contents
