Table of Contents
Advertisement
Key Operator Setting
F
Press [OK].
G
Press [Exit].
H
Press the { { { { User Tools/Counter} } } } key.
The initial display is shown.
Programing ISDN G3 Line
This function must be set when you
connect the machine to an ISDN G3
digital line.
You can program the following items.
• Own Fax Number 1
• Own Fax Number 2
• Sub-address ⇒ P.49 "Sub-address"
Note
❒ Optional ISDN Unit is required.
❒ Program the Own Fax Number 1
as your own digital number. And
Own Fax Number 2 as another dig-
ital number which occupies a sin-
gle line.
❒ You should program the Own Fax
8
Number 1.
❒ ISDN allows two or more termi-
nals (such as a fax machine and
digital telephone) to be connected
to a single line. These terminals are
identified by their sub-address
numbers. If the terminals connect-
ed to the line at a destination are
assigned sub-addresses, dialing a
sub-address allows you to direct
your fax message to a particular
terminal at the destination.
❒ Up to four digits (0 to 9999) are
available for a sub-address
166
A
Press the { { { { User Tools/Counter} } } } key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
C
Select [Key Operator Tools].
D
Select [Program ISDN-G3 Line].
Note
❒ If "Program ISDN-G3 Line" is
not shown, press [U U U U Prev.] or [T T T T
Next].
E
Select an item you want to pro-
gram.
Advertisement
Table of Contents
