Simplifying The Operation; Programs; Registering Keystroke Programs - Savin 1045 Facsimile Reference Manual

6. Simplifying the Operation

Programs

If you regularly send messages to a
particular destination or transmit us-
ing the same features, you can save a
lot of repetitive keypad operations by
registering this information in a Key-
stroke Program.
Registering Keystroke
Programs
Keystroke Programs can be recalled
by just pressing a Quick Dial key. The
following procedure can be used to
program a new Keystroke Program or
overwrite an old one.
You can register the following items
in Keystroke Programs:
• Memory Transmission, Immediate
Transmission, destinations (up to
500 numbers), Resolution, Original
Type, G3 or G4 communication
mode, Stamp, Send Later, Default
ID, Auto Document, Book Fax,
Transfer Deadline, Polling Trans-
mission, Polling Reception, Trans-
fer Request, 2–sided transmission
and optional functions
• Program name (up to 20 charac-
ters)
Important
❒ We recommend that you print the
Keystroke Program list and keep it
when you register or change a
function. ⇒ P.119 "Reports/Lists"
Limitation
❒ You cannot register a program in a
Quick Dial key used for another
function.
❒ When a registered program key is
being used for a Memory Trans-
mission on standby, the message
"
Specified destination is
used by transmission standby
file. It cannot be changed or
deleted. Specify it again af-
ter transmission is complet-
" is displayed and you cannot
ed.
change the function for this key.
Note
❒ The maximum number of pro-
grams you can register is 100 (up to
200 with optional Fax Function
Upgrade Unit installed).
A
Prepare for registering the program.
Note
❒ The procedure of programming
is differs depending on pro-
grams you want to register.
❒ Press the {Clear Modes} key to
cancel programming.
Example of registering a program
using Send Later with the fax
number "0123456789".
A Press { { { { 0} } } } , { { { { 1} } } } , { { { { 2} } } } , { { { { 3} } } } , { { { { 4} } } } ,
{5}, { { { { 6} } } } , { { { { 7} } } } , { { { { 8} } } } , { { { { 9} } } } with the
number keys.
B Press [Transmission Mode].
C Select [Send Later].
D Specify "Send Later".
Note
❒ If "Send Later" is already
specified, that time is shown.
Press the {Clear Modes} key to
change "Send Later".
93