Selecting Dial/Push Phone; G3 Analog Line - Savin 2018 Operating Instructions Manual

Kir-C2-ENcombine_F_FM.book Page 98 Friday, September 19, 2003 3:03 PM
Key Operator Setting

Selecting Dial/Push Phone

Use this function to select a line type.
Dial and Push lines are available for
selection.
Note
❒ This function is not available in
some areas.
A A A A
Press the { { { { User Tools/Counter} } } } key.
User Tools/
Counter
On Hook Dial On Hook Dial
B B B B
Select [Fax Features] using { { { { U U U U } } } } or
{ { { { T T T T } } } } , and then press the { { { { OK} } } } key.
7
C C C C
Select [Key Operator Tools] using
{ { { { U U U U } } } } or { { { { T T T T } } } } , and then press the
{ { { { OK} } } } key.
D D D D
Select [Select Dial/Push Phone] us-
ing { { { { U U U U } } } } or { { { { T T T T } } } } , and then press the
{ { { { OK} } } } key.
98
Clear
Modes
Clear/Stop
ABC DEF
AAN115F
E E E E
Select [Push Phone] or [Dial Phone]
using { { { { U U U U } } } } or { { { { T T T T } } } } , and then press
the { { { { OK} } } } key.
The display returns to that of step
D
.
Reference
p.107 "Selecting the Line Type"
F F F F
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.

G3 Analog Line

You need to make the following set-
tings for the G3 Analog Line before
you connect the machine to a stan-
dard G3 analog line.
• When your machine is connected
through a PABX, set to Extension.
If it is connected directly to the
telephone network, set to Outside.
• Outside Access Number
Use this setting if your machine is
connected to a PABX that requires
you to dial a certain number such
as "0" followed by a pause to con-
nect to the outside line. By pro-
gramming "0" as the PSTN Access
Number, a pause will be inserted
automatically after the "0" when
dialing.
Important
❒ The set Outside Access Number is
not used for the dialing using the
{ { { { On Hook} } } } key or an external tele-
phone.