Table of Contents
Advertisement
Confidential Transmission
If you do not want your message to be
picked up casually at the other end,
use this feature. The message will be
stored in memory at the other end
and will not be printed until an ID is
entered.
Transmitter
Preparation
If you install the optional Expan-
sion Memory or Hard Disk option,
program the Confidential ID. ⇒
P.162 "Programing a Confidential
ID"
There are two types of Confidential
Transmission:
❖ ❖ ❖ ❖ Default ID
The other party can print the mes-
sage by entering the Confidential
ID programmed in their machine.
❖ ❖ ❖ ❖ ID Override
Should you wish to send a confi-
dential message to a particular per-
son at the other end, you can
specify the Confidential ID that
person has to see that message. Be-
fore you send the message, do not
forget to tell the intended receiver
the ID that must be entered to
print.
Limitation
❒ The destination machine must be
of the same make and have the
Confidential Reception feature.
❒ The destination machine must
have enough memory available.
Note
❒ We recommend that you program
Receiver
the Confidential ID beforehand.
❒ An ID can be any 4 digit number
except 0000.
❒ When the machine is not the same
make, you can use Confidential
Transmission using "SUB Code".
ND1X01E5
A
Place your original and select any
scan settings you require.
B
Press [Transmission Mode].
The Transmission Mode menu ap-
pears.
C
Select [Confidential TX].
Confidential Transmission
1
7
Advertisement
Table of Contents
