G3 Digital Line - Savin 3699 Key Operator Tools

Key Operator Tools
D
Enter the code for "System Set-
tings" with the number keys.
E
Enter the code for "G3-2 Analog
Line" using the number keys.
F
Enter the code for "PSTN Line
Type" using the number keys.
G
Select the desired line type and
press [OK].
9
H
Enter the code for "CSI" with the
number keys.
I
Enter your CSI and press [OK].
246
J
Press [PrevMenu] three times.
K
Press [Exit] to return to the stand-
by mode.

G3 Digital Line

This function requires the optional G4
Unit.
The following settings are available
for G3 communications over ISDN:
• Own Fax Number 1
Enter the number of the line the
machine is connected to.
• SPID (Own Fax Number 2)
Enter the number of SPID. If the
"ISDN Directory Number Select
(SPID)" setting in the User Param-
eters is turned off, the display
shows "Own Fax Number 2" in-
stead of "SPID". These settings are
identical.
• Sub-address
• CSI (maximum 20 characters)
Enter the international identifica-
tion number that is transferred to
the other party during transmis-
sion or reception.
Note
Before storing the sub-address,
store the sub-address function in a
User Function key.
signing User Function Keys"
The CSI is an international identifi-
cation number that is transferred
to the other party during transmis-
sion or reception. This information
appears on the display of the other
party's fax machine and is printed
on their lists and reports. The CSI
feature works with other manufac-
turer's fax machines that support
this feature.
P.211 "As-