Table of Contents
Advertisement
F
Specify the transmission mode
from [2 Sided from 1st Page] or [1 Sid-
ed for 1st Page].
The initial display is shown.
G
Press [OK].
The [2 Sided Original] key is high-
lighted, and "Original position"
and "Page Opening Orientation"
are shown above.
H
Dial and press the { { { { Start} } } } key.
Standard Message Stamp
Use this feature to stamp a standard
message at the top of the first original
sent.
There are four types of standard mes-
sages: "Confidential", "Urgent",
"Please phone" and "Copy to corres.
section"
You can also program other messages.
Note
❒ While this feature is in use, the sec-
ond and third lines of the "Label
Insertion" are not printed.
❒ When there is an image around the
area where the standard message is
to be stamped, that image is deleted.
❒ To program a standard message,
use the "Program/Change/Delete
Standard Message" function. ⇒
P.111 "Programing Standard Mes-
sages", P.112 "Deleting Standard
Messages"
A
Place your originals and select
any scan settings you require.
B
Press [Sub TX Mode].
The Sub Transmission Mode menu
is shown.
C
Select [Std. Message].
D
Select the standard message to be
stamped.
Note
❒ Programed standard messages
are shown in the keys. If there
are none programed, the mes-
sage "pNot Programed" is
shown.
❒ The machine cannot stamp mul-
tiple standard messages.
Sub Transmission Mode
4
57
Advertisement
Table of Contents
