Having Incoming Messages Printed On Paper From The Bypass Tray - Savin 1045 Facsimile Reference Manual

Reception Features
Having Incoming Messages Printed on Paper from the Bypass
Tray
You can have messages sent from Specified Senders printed on paper from the
Bypass Tray. This is useful if you need messages printed on a size of paper not
stocked in the paper cassette(s).
Limitation
❒ The print area is determined by Optional Expansion Memory, Resolution,
and the vertical length of originals.
Note
❒ Before you can use this feature, you need to turn on Authorized Reception
(Initial Setup Reception Mode settings), program the Specified Senders (Key
Operator Settings) along with the Paper. ⇒ P.126 "Reception Mode", ⇒ P.141
"Special Senders to Treat Differently"
❒ When you set paper sizes other than A4 landscape, B4 landscape and portrait,
5
A3 landscape and portrait in the Bypass Tray, specify the paper size. This size
should match the bypass paper size for copying or a paper jam may occur. To
change the bypass paper size for copying. ⇒ "Copying from the Bypass Tray"
in the Copy Reference manual
❒ If the specified paper size and the size of paper set in the Bypass Tray do not
match, paper jams may occur and the image may be truncated.
❒ If you use this feature, Image Rotation and 180 Degree Rotating Printing, are
not possible.
90