Table of Contents
Advertisement
Checking and Canceling Transmission Files
Re-sending a File
This function is valid when the ma-
chine is set up with the User Parame-
ters to save messages that could not
be sent in memory.
If you select the failed transmission
2
file, you can resend it. This feature al-
lows you to transmit a fax message
again. These files will be kept for ei-
ther up to 24 or 72 hours depending
on how you program this feature. ⇒
P.136 "Changing the User Parame-
ters"(Switch24, Bit1,0)
A
Press [Change/Stop TX File].
B
Press [Transmit Failed File].
C
Select a file you want to resend.
22
Note
❒ "TX Failed" displays when the
file fails to transmit.
❒ If a desired file is not shown,
press [U U U U Prev.] or [T T T T Next].
❒ If you select multiple destina-
tions, the first file selected is dis-
played.
❒ If you select multiple destina-
tions, only the number of files
which have not been transmit-
ted is shown.
D
Press [OK].
Note
❒ To add destinations, press [Add]
to specify.
❒ To cancel transmissions, press
[Cancel] and the display will re-
turn to step C.
E
Press [Exit].
The initial display is shown.
Note
❒ Repeat step C, if you resend an-
other file.
Advertisement
Table of Contents
