Sending A Stored File - Savin 1045 Facsimile Reference Manual

D
Select Auto Document file.
When you fax an Auto Document
by itself, press [TX Stored File(AD)
Only].
Note
❒ Programed Auto Documents
are shown in the keys. If there
are none programed, the mes-
sage "pNot Programed" is
shown.
❒ If a desired file is not shown,
press [U U U U Prev.] or [T T T T Next].
❒ If you make a mistake, press
[Cancel] and try again.
❒ To cancel the Auto Document,
press [Cancel] and the display
will return to step C.
E
Press [OK].
The "Auto Document" is highlight-
ed, and the selected file name is
shown above.
F
Press [OK].
G
Dial and press the { { { { Start} } } } key.

Sending a Stored File

Use this feature to send documents
that are stored in the Document Serv-
er. You can specify and send multiple
documents, and also send them with
scanned originals all at once.
You can also print the stored originals
with [Print File].
Preparation
Store the documents to be sent in
advance. ⇒ P.97 "Using the Docu-
ment Server"
Limitation
❒ Only the documents that are
stored using the fax feature can be
sent or printed by pressing the
{Facsimile} key. Documents stored
using the copy feature or printer
feature can be printed by pressing
the {Document Server} key. ⇒ "Doc-
ument Server" in the Copy Refer-
ence manual
Sending Stored Documents
The machine sends documents that
are stored in the document server.
The documents stored in the docu-
ment server can be sent again and
again until they are deleted. Once
sent, the documents are stored into
the document server. Therefore, you
can send them in just one operation
without having to set your originals
again.
Limitation
❒ Only the documents that are
stored using the fax feature can be
sent. Documents that are stored
using the printer feature or scan-
ner feature cannot be sent.
Sub Transmission Mode
4
59