Table of Contents
Advertisement
Troubleshooting
When Power is Turned off or Fails
Even if the Main Power switch is turned off, the contents of the machine's mem-
ory (programmed numbers etc.) will not be lost. However, if power is lost for
about 1 hour by the Main Power switch being turned off, a power cut or the
power cable being removed, contents of the Fax memory will be lost. Lost items
will include any fax messages stored in memory using Memory Transmission or
Reception.
If a file has been deleted from memory, a Power Failure Report is automatically
printed as soon as power is restored. This report can be used to identify lost files.
If an original stored by Memory Transmission was lost, re-send it. If a message
received by Memory Reception or Substitute Reception was lost, ask the sender
to re-send it. If an Auto Document was lost, you will need to store it in memory
again.
Important
❒ Make sure that 100% is shown on the display before you unplug the machine.
If a lower value is shown, some data is currently stored in memory.
❒ Right after a power failure, the internal battery needs to be sufficiently re-
charged to guard against future data loss. Please keep the machine plugged
in and the Main Power switch on for about 24 hours after the power loss oc-
curs.
10
178
Advertisement
Table of Contents
