Table of Contents
Advertisement
Transmission Features
Dual Access
The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory , or automat-
ically printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission terminates, the line
will be used efficiently.
Note that during Immediate Trans-
mission or when in User Tools mode,
4
the machine cannot scan an original.
Transmission with Image
Rotation
For most purposes, place A4/LT orig-
inals in the landscape direction (L).
If you place an A4/LT original in the
portrait direction (K), the image will
be sent rotated by 90°. Providing the
receiver has A4/LT landscape paper
(L), the message will be printed the
same size as the original.
Limitation
❒ This feature is not available with
Parallel Memory Transmission or
Immediate Transmission.
❒ When Image Rotation is used, all
messages are sent by normal Mem-
ory Transmission.
72
Simultaneous Broadcast
The optional ISDN Unit or optional extra
G3 Interface Unit is required.
The Standard Broadcast feature sends
faxes one at a time to multiple desti-
nations in the order of specified desti-
nation numbers.
The Simultaneous Broadcast feature,
however, can send faxes three at a
time to multiple destinations by
transmitting simultaneously over dif-
ferent lines.
This results in a shorter overall trans-
mission time.
Note
❒ This feature can use a maximum of
3 lines simultaneously.
❒ When using the optional extra G3
Interface Unit, if you set the line se-
lection to "G3 Auto Select" before-
h a n d , t h e m a c h i n e w i l l u s e
whichever G3 line is not busy
thereby increasing efficiency.
JBIG Transmission
Fax Function Upgrade Unit is required.
If you use JBIG (Joint Bi-level Image
Experts Group) compression you can
send photographic originals faster
than the other compression method.
You can only use this feature with
G3/I-G3 of line type.
Limitation
❒ If ECM is turned off, JBIG Trans-
mission is not available.
❒ This feature requires that the other
party's fax machine has both the
JBIG function and ECM function
(G3 communication only).
Advertisement
Table of Contents
