Table of Contents
Advertisement
Facsimile User Tools
General Setting/Adjustment
Make the settings for the following
items. The set items are highlighted
on the Fax User Tool menu when the
power is turned on.
• Memory/Immed.
Switch
Use this feature for specifying the
transmission mode for document
transmission.
• Text Size Priority
Use this feature to specify the char-
acter size of your originals for
scanning.
• Original Type Priority
Use this feature for specifying the
type of originals for scanning.
• Auto Image Density Priority
Use this feature for specifying
whether to prioritize automatic
image density for scanning your
7
originals.
• Scan Density Adjustment
Use this feature for specifying the
scan density of your originals.
• Change Title of Quick Dial Table
Use this feature for selecting the ti-
tle to be shown on the quick dial ta-
ble.
• Quick Dial Table Display Switch
Use this feature for displaying the
ten-keys instead of the quick dial
table.
• Sound Volume Adjustment
⇒ Chapter 4, "Adjusting Volume"
in the Basic Features manual
• Program Fax Information
⇒ Chapter 3, "Initial Settings and
Adjustments" in the Basic Features
manual
120
• Fax Header Print Setting
Transmission
• Label Insertion Priority Setting
• Reduced Image Transmission Set-
• Auto Reduced Image Setting
• Closed Network Priority Setting
• Scan End Reset
• Mix Original Size Priority Setting
• TX Stamp Priority
• Line Priority Setting
Use this feature for specifying
whether sender name you will use
when there are two sender names
(for printing) programed.
Use this feature for specifying
whether to use the label insertion
feature.
ting
Use this feature for specifying
whether to use reduced image
transmission. ⇒ P.66 "Transmis-
sion Options"
Use this feature for specifying
whether to transmit an automati-
cally red uced im age. ⇒ P.66
"Transmission Options"
Use this feature for specifying
whether to execute ID transmis-
sion. ⇒ P.66 "Transmission Op-
tions"
Use this feature for specifying
whether to return to the initial set-
tings each time an original is
scanned.
Use this feature for specifying
whether to use the Mixed Original
Sizes when your originals are set in
the Document Feeder (ADF).
Use this feature for specifying
whether to press a TX stamp.
Use this feature for prioritizing the
line of usage.
Advertisement
Table of Contents
