Transmission Mode
Polling Reserve Report
This report is printed after Polling Re-
ception has been set up.
1
Note
❒ By default, this report is turned off.
Turn it on with the User Parame-
ters. ⇒ P.136 "Changing the User
Parameters"(Switch03, Bit3)
Polling Result Report
This report is printed after a Polling
Reception has been completed and
shows the result of the Polling Recep-
tion.
Note
❒ You can also check the result of a
Polling Reception with the Journal.
❒ By default, this report is turned on.
Turn it off with the User Parame-
ters. ⇒ P.136 "Changing the User
Parameters"(Switch03, Bit4)
14