Program/Delete Menu; Changing The Order Of The Quick Dial Table - Savin 1045 Facsimile Reference Manual

Facsimile User Tools

Program/Delete Menu

Changing the Order of the
Quick Dial Table
Use this feature to change the order of
the programed quick dial table.
It would be convenient if you list the
receivers that you fax to frequently on
the first page of the quick dial table.
Note
❒ You can only change the order
within Title 1, Title 2, and Title 3.
You cannot change the order with-
in the Destination List.
Pressing an arrow key will move the
selection to the desired destination
key position.
7
By pressing [→ → → → ] as shown in the
menu above, the destination key
moves to the right.
108
By pressing [↓ ↓ ↓ ↓ ] from the top menu,
the destination key moves down.
Reference
⇒ Chapter 3, "Programing Quick
Dials" in the Basic Features manual
A
Press the { { { { User Tools/Counter} } } } key.
B
Select [Facsimile Features].
The Initial Facsimile Features
menu is shown.
C
Check that the "Prog./Change/De-
lete" tab is shown.
D
Select [Change Order of Quick Dial Ta-
ble].