Table of Contents
Advertisement
Key Operator Setting
E
Press [ON].
F
Press [OK].
G
Press the{ { { { User Tools/Counter} } } } key.
The initial display is shown.
Forwarding Mark
You can print a Forwarding Mark on
the receiver's messages which have
been forwarded.
The receiver is easy to distinguish
from forwarding paper and usual re-
ceptions.
You can specify whether or not to
print a Forwarding Mark with P.136
" C h a n g i n g
8
ters"(Switch02, Bit0). The default set-
ting is on.
134
t h e
U s e r
P a r a m e -
Memory Lock
When you switch Memory Lock on,
received messages are stored in mem-
ory and are not printed automatical-
ly. When a message is received in the
Memory Lock mode, the Confidential
File indicator blinks. To print this
message, enter the Memory Lock ID.
A user without the ID cannot print
the message. This prevents an unau-
thorized person from seeing the mes-
sage.
To use Memory Lock, program the
Memory Lock ID and switch it on.
A
Press the { { { { User Tools/Counter} } } } key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
C
Select [Key Operator Tools].
The Key Operator Tools menu is
shown.
Advertisement
Table of Contents
