Programing Isdn G4 Line - Savin 1045 Facsimile Reference Manual

Programing Own Fax Number 1
and Own Fax Number 2
A Select [Own Number 1] or [Own
Number 2]
B Enter
your
number with the number keys.
C Press [OK].
Programing a Sub-address
A Select [Sub-address].
B Enter a sub-address with the
number keys.
C Press [OK].
F
Press [Exit].
G
Press the { { { { User Tools/Counter} } } } key.
The initial display is shown.
own facsimile
Changing Key Operator Settings

Programing ISDN G4 Line

This function must be set when you
connect the machine to an ISDN G4
digital line.
You can program the following items.
• Own Fax Number 1
• Own Fax Number 2
• Sub-address ⇒ P.49 "Sub-address"
Note
❒ Optional ISDN Unit is required.
❒ Program the Own Fax Number 1
as your own digital number. And
Own Fax Number 2 as another dig-
ital number which occupies single
line.
❒ You should program the Own Fax
Number 1.
❒ ISDN allows two or more termi-
nals (such as a fax machine and
digital telephone) to be connected
to a single line. These terminals are
identified by their sub-address
numbers. If the terminals connect-
ed to the line at a destination are
assigned sub-addresses, dialing a
sub-address allows you to direct
your fax message to a particular
terminal at the destination.
❒ Up to four digits (0 to 9999) are
available for a sub-address
A
Press the { { { { User Tools/Counter} } } } key.
B
Press [Facsimile Features].
The Facsimile User Tools menu is
shown.
8
167