IGP Commands
configure rip garbagetime
configure rip garbagetime {<seconds>}
Description
Configures the RIP garbage time.
Syntax Description
seconds
Specifies a time in seconds.
Default
120 seconds.
Usage Guidelines
None.
Example
The following command configures the RIP garbage time to have a 60-second delay:
configure rip garbagetime 60
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1836
ExtremeWare 7.7 Command Reference Guide